Geisha Bitch Bobber:
Well, here is my completed XS650 Geisha Bitch Bobber:
1. Frame By the Dave the
Tig Man www.tanksbytigman.com
2. Harley Neck
3. Harley Wide Glide
4. Harley Controls (Foot & Hand)
5. Harley 18x5.5 Rear Wheel w/200mm Avon
6. Harley 21x2.75 Front Wheel w/Avon Tire
7. Harley Brakes F&R
8. Custom Machined 3/4in Offset Sprocket
9. Custom Machined 3/4in Offset Spacer for Left Motor Cover
(after you offset the sprocket the cover and clutch actuator will
not fit)
10. Custom Machined 3/4in Offset adapter for the Shifter Rod
(after you offset the sprocket and the cover you need to extend
the shifter rod)
11. Custom Machined Motor Mounts
12. Boyer Brasden Ignition from www.mikesxs.com
13. Gimp Ape Hangers from Nash
Motorcycles
14. Lots and Lots of other Custom Fabricated do-dads...
15. Custom Seat and Pan (FYI says "Ride Hard")
FYI! If anyone wants to run a 200mm tire on a Custom frame or
Custom Swingarm (without offsetting the motor) I could sell you a
kit that has all of the offset parts you need to do it.
You can email me @ gary.poh@rogers-strong.com - Thanx
Seat Says: "Ride Hard"
Offset Countershaft Sprocket
Spacer For The Alternator Cover
Regulator / Rectifier On Front Motor Mount
XS650 Cycle Links, Images & Info: Click Here!
Return To:
